eTreego 120kW Quick Charger for EV (L3-S120PC2M)

feature

Subsidized Products
FY2023 Amendment, FY2024 (1st and 2nd phases) Approved for subsidy
Up to 5 million yen in subsidies will be granted.
CHAdeMO certified products
Certified to international standards including CHAdeMO certification
high power
High output of up to 120 kW when one unit is connected (60 kW when two units are connected)
Cabinet and terminal separation style
Independent cabinet and two charging terminals for smart installation
OTA Update
Remote updating of updates is possible in case of an emergency
Smart Charging
Smart charging with interactive charging management system

(technical) specification

(data) itemstandardoption
model (e.g. of a vehicle)L3-S120PC2M
typeCabinet + Terminal
Rated output120 kW (Max.)
power factor> 0.98 @Full load
inputVoltage3 Phase 400 VAC±15%
(3P+N+PE)
electric current< 220A
(Use a 250A ground-fault circuit breaker.)
frequency (esp. of waveforms)50/60 Hz
output (e.g. of dynamo)Voltage150~600 VDC
Current (max.)200 A (when charging only one unit)
Power (max.)120 kW (when only one unit is charged)
Number of charging interfaces2
Charging interfaceCHAdeMOCCS1/CCS2/GB
Charge control0/120kW & 120kW/0 & 60kW/60kW
(using dynamic control function within the maximum power limit)
Charging ProtocolCHAdeMO 2.0CCS1/CCS2/GB
communication systemRS-485
(Modbus RTU / Modbus TCP )
Ethernet/4G
(OCPP 1.6)
Display Monitor10-inch LCD touch panel
Charging lamp indicatorPower status / Charging status / Protection status
CertificationRFID (contactless IC tag)
environmentAmbient temperature-10°C ~ 50°C
Ambient humidity<90% (no condensation)
Elevation≦2000M
Dustproof and waterproofpower cabinetIP54
Charging terminalIP54
Cooling methodforced air cooling
Charging cable length5mBy Request
External dimensionspower cabinet1100mm x 900mm x 1930mm
Charging terminal500mm x 230mm x 1650mm
weightpower cabinet450kg
Charging terminal80kg